We design, commission and install hydraulic piping systems. Whether the assignment is an extensive new construction project, expansion of existing installations, connections to an existing piping network, or modification of installations, our skilled service engineers realise the project successfully. We design complete hydraulic piping systems with parts lists and material specifications according to the customer’s criteria. The prefabrication of the piping usually takes place in our workshop.

While installing and commissioning the hydraulic piping systems, there are five important phases in this process:

• Installation;
• Rinsing, filling and air bleeding;
• Cold commissioning, testing for pressure and tightness;
• Warm commissioning, testing and adjustment at the highest load, and at a minimum and maximum speeds and power;
• Final checking, general inspection, and release of the system. The guarantee for the performance of the entire system starts after the release of the system.

Our experienced service engineers are deployed worldwide to install and commission the hydraulic piping system. The service engineers are equipped with the most modern tools, such as mobile bending machines, measuring and welding equipment. This enables us to serve our customers optimally. For long term or complex projects, our mobile workshop is used, so that the hydraulic piping can also be manufactured on-site.

Our workshop has the most modern equipment to bend the pipes according to the desired requirements. It is our preference to carry out the hydraulic piping non-weld. This ensures the customer of the highest possible quality, with the least chance of downtime. At the request of the client, piping systems with welding flanges are also possible.

The engineers design complete hydraulic pipeline systems that meet the highest demands of the customer in the industrial, maritime and offshore sector. The high-quality piping systems can be designed for both small projects and large complex projects. The piping can be installed at customers based in the Netherlands but also at customers based abroad. Our engineers can translate the customers desired design into detailed 3D drawings. Based on the design and the specification of the required materials, the prefabrication of the pipes is usually carried out in our workshop.

The piping systems are precisely fabricated according to the drawings. The pipes are bent with a bending machine with a bending capacity up to a diameter of 60 mm. At request, it is possible to bend larger diameters. Pipelines can be made of steel or stainless steel.

The pipelines are assembled according to a standard procedure and if desired, the pipes are provided with welding couplings and flanges. Couplings are made by means of a hose press. There are several possibilities to process pipe ends:

• Flare F37
• Walform plus
• Cutting ring
• Weld

By means of a contaminator eliminator (CE System), the hydraulic pipes are cleaned internally after production. The piping is blinded by means of plastic plugs but also steel or stainless steel plugs are possible. The pipes can be provided with a coating according to customer-specific requirements.

We can carry out various tests and inspections, such as flushing pipes or the entire piping system according to ISO/NAS guidelines. The cleanliness is checked by taking an oil sample. In addition, we carry out pressure tests as well as non-destructive testing by third parties and destructive testing by third parties.